Sapa Door 2060 – heavy duty

 

Sapa Door 2060

This door system is based on uninsulated aluminium profiles with a profile depth of 60 mm. The outside glazing bead is integrated in the door profile for asymmetrically installed glazing units. The system has replaceable rebate profiles. The door leaf profiles are available for all types of locks and with anti-finger trap edge. The doors can be easily combined with our fa├žade and partition systems 3050, 3060, 4150, 5050 SG and 3074.

  • Versions. Single-leaf, double-leaf and meeting doors with or without side and top light.
  • Anti-burglar protection. Available in anti-burglar protection RC2 or RC3 according to EN 1627.
  • Replaceable rebate profiles and break-out protection. Facilitate repairs.
  • Fire protection. Available in fire resistance class E 30 or EI 30.
  • Personal safety. Available with anti-finger trap edge.
  • Bullet-proof. Available in bullet-proof class C1-C4, according to SS 22 44 29.

Glazing

Unprotected glazed surfaces that can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.

Threshold alternatives

Door openings should be designed without level differences from inside to outside. Sometimes a threshold is not required because of, for example, moisture or non prevailing weather conditions. When a threshold is installed, it should be as low as possible to facilitate passage. Applicable standards and requirements should be taken into account.

Anti-finger trap protection

In order to reduce the risk of injury due to squeezing, we have developed a solution based on a socalled anti-finger trap edge. Applicable standards and requirements should be taken into account.

Fixing principles

Door elements must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the element.

Fittings

Our door system can be easily equipped with the most common fittings available on the market. For optimum functionality it is important that the fittings work together.

Surface finish

We offer the widest surface finishing program for aluminium sections in Scandinavia. Which surface to prefer depends on the desired colour and finish.

Anodising


It is an electrolyticprocess in which an oxide layer is formed. The layer reinforces the surface which becomes resistant to mechanical wear, UV radiation and the influence of aggressive environments. Anodising ensures durability of colour and lustre. Anodising can be delivered in colour Clear anodising, Hardoxal ( bronze to black) and in “stainless steel” look.

Painting

In order to obtain the right quality of the painted surface it is important that the pre-treatment and application of paint, as well as the subsequent curing are done correctly. We can also offer a non chromating pre-treatment. Powder coating is without doubt the dominating painting method today. Painting offers an unlimited selection of colours. In principle, there are no limitations as regards the
colours. The RAL and NCS-S scales offer a large number of colours.

Decoral

The decorative effect on the powder coated section is obtained by applying a pattern on the painted section. Decoral offers a number of different patterns/colours,such as granite, stone, and marble, as well as different kind of wood, such as pinewood, oak, beech, and teak, in addition to Decoral fantasy. All colours are resistant to UV radiation and fully comparable with powder coating.