Sapa Sliding Door 2050, automatic
Our automatic 2050 sliding doors are based on a stable solution with a possibility of several different add-on functions. The system is based on uninsulated aluminium profiles with a profile depth of 50 mm. The fixed parts can be made of the 3050 or the 3074 system profiles. The top frame element can be made of different profiles adapted for various automatic devices available on the market.
- Versions. Single-wing, double-wing, single-wing telescopic and double-wing telescopic
- Application areas. Entries and interior doors for use in very frequented places as well as for passage with shopping trolleys, prams, etc.
- Automatic systems. These can be adapted to the required functions and the customer’s special needs. See information provided by the suppliers of automatic systems
- Locks. The door leaf can be equipped with locks in the front and the back edge
Automatic devices for sliding doors
These can be adapted to the required functions and the customer’s special needs. For more information contact us.
Glazing
Unprotected glazed surfaces which are so located that they can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.
Infill panels
Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels. If the infill panels are exposed to heavy impacts or mechanical loads, the backing should be made of durable board and the surface layer should be made of stainless or glass enamelled steel sheet.
Fixing principles
Door elements must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the element.
Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels. If the infill panels are exposed to heavy impacts or mechanical loads, the backing should be made of durable board and the surface layer should be made of stainless or glass enamelled steel sheet.
